Features
| MODEL | HL-26AT | HL-32AT | |
| CAPACITY | |||
| Distance to spindle centre | mm | 460 | 500 |
| turning Ø | mm | 200 | 310 |
| max. Ø turning | mm | 260 | 400 |
| max. length turning | mm | 180 | 230 |
| Spindle centre height – floor | mm | 1150 | 1210 |
| SPINDLE | |||
| Speed | RPM | 25-4500 | 25-3500 |
| Hole through spindle | mm | 51 | 77 |
| Spindle cone | – | A2-6 | A2-8 |
| TURRET | |||
| Type | m/min | 12T+12T | 10T+10T |
| Num. of tools | m/min | 12+12 | 10+10 |
| FEED | |||
| Quick feed (X) | m/min | 20 | 20 |
| Quick feed (Z) | m/min | 20 | 20 |
| Horizontal run (X) | mm | 180 | 210 |
| Horizontal run (Z) | mm | 220 | 230 |
Honor Seiki manufactures a double spindle front loading frontal lathe. This makes it possible to do two processes that are the same or the first phase and the second phase of one process on a single machine because with both spindles installed in parallel productivity is increased because turning can be fed by an operator or gantry robot with lateral part loaders.
