Module M16
Max. wheel diameter 1.200mm
Workpiece diameter 1.500mm
Perú
HYDRÁULIC ROTARY TABLE Masted Assembly DVH-225
Dimensiones 800x800mm
Altura divisor 225mm
Carga admisible 1.250kgs
CNC Rotary table Tanshing MRNC-255
Table diameter 255mm
Table height 167mm
Spindle hole diameter 32mm
RADIAL DRILL MAS VO-50
Arm length 1.500mm
Max. in drilled 50mm
Longitudinalmovement 1.280mm
DRILLING MACHINE MAS VO 63
Arm leght 2.000mm
Max in drilled (steel) 63mm
Max in dirlled (cast iron) 90mm
Max. height 1.865mm
Boring machine SACEM MST.130
Diámetro husillo 130mm
Eje X 2.500mm
Eje Y 2.000mm
Boring machine AYCE AC 70 B4
X 1.300 mm
Y 800 mm
Z 1.200 mm
W 600 mm
TRAVELLING COLUMN MILLING MACHINE DYE
Desplazamiento longitudinal 3.000mm
Desplazamiento vertical 1.500mm
Salida del husillo 500mm
Bridge Milling machine CORREA FP-50/50
Longitudinal Travel 5.000mm
Cross Travel 3.250mm
Vertical Travel 1.000mm
Altas prestaciones
| MODELO | FNL-250Y/SY | FNL-320Y/SY | |
| CAPACIDAD | |||
| Ø sobre bancada | mm | 600 | 600 |
| Ø sobre carro | mm | 600 | 600 |
| Ø máximo de corte | mm | 350 | 460 |
| Longitud máxima de corte | mm | 558 | 548 |
| CABEZAL | |||
| Diámetro del husillo | mm | 77 | 88 |
| Velocidad del husillo | rpm | 4500 | 4000 |
| RECORRIDOS | |||
| Recorrido eje X | mm | 310 | 310 |
| Recorrido eje Y | mm | ±55 | ±55 |
| Recorrido eje Z | mm | 620 | 620 |
| Recorrido eje ZB | mm | 650 | 650 |
| AVANCES | |||
| Avance rápido eje X/Y | m/min | 24/20 | 24/20 |
| Avance rápido eje Z/ZB | m/min | 30/20 | 30/20 |
| CONTRAPUNTO | |||
| Recorrido del contrapunto | mm | 650 | 650 |
| Cono Interior | – | MT4 | MT5 |
