Features
| MODEL | WRD 160 H | WRD 180 H | WRD 200 H | |
| COURSES | ||||
| X -– Column longitudinal travel | mm | 5000-29000, in sections of 1000 | ||
| Y – Headstock vertical travel | mm | 3000-6000, in sections of 500 | ||
| Z – RAM stroke | mm | 1600 | ||
| HEADSTOCK | ||||
| Tool-holding slide diameter | mm | 550×550 | ||
| Work spindle diameter | mm | 160 | 180 | 200 |
| W – Spindle stroke | mm | 1200 | ||
| Main motor power S1 | Kw | 74/101 | ||
| Work spindle speed range | 1/min | 10-3000 | 10-2500 | 10-2000 |
| Torque on spindle S1 | Nm | 6820 | 11165 | 13927 |
| FEEDS | ||||
| X,Y,Z,W | mm/min | 20000 | ||
| MODELO | WRD 160 H | WRD 180 H | WRD 200 H | |
| CURSOS | ||||
| X – Longitudinal columna | mm | 5000-29000, en tramos de 1000 | ||
| Y – Vertical cabezal | mm | 3000-6000, en tramos de 500 | ||
| Z – Transversal RAM | mm | 1600 | ||
| CABEZAL | ||||
| Sección RAM | mm | 550x550 | ||
| Diámetro barra mandrinar | mm | 160 | 180 | 200 |
| W – Axial barra mandrinar | mm | 1200 | ||
| Potencia cabezal S1 | Kw | 74/101 | ||
| Velocidad husillo | 1/min | 10-3000 | 10-2500 | 10-2000 |
| Par husillo S1 | Nm | 6820 | 11165 | 13927 |
| AVANCES RÁPIDOS | ||||
| X,Y,Z,W | mm/min | 20000 | ||
