Flanging machine CHR. HAEUSLER HBM 15-hy

Flanging machine CHR. HAEUSLER HBM 15-hy
Technical features


Max. head diameter mm 4.000
Min. head diameter mm 750
Max. plate thickness for cold mm 20
Flanging material240N/mm2 mm 10/12
Max. knuckle radius mm 450
Max. head height mm 700
Circumferential speed of flanging and forming roller m/min 100
Outer pressure roller
·       Drive Hydraulic motor
·       Positioning/Swiveling Variable by hydraulic cilinder
Form roller (Inner)
·       Drive Hydraulic motor


16 form rollers
Profile checking templates and messuring devices


Dimentions: Length x width x height                                   5.500×3.050×4.250mm
Weight                                                                                         20.000 kg
YOM/ Retroffited                                                                   1967/2016
It is posible to upgrade the original control panel by touch screen to make friendly use or may change complete electrical box





The machine is of a rigid C-frame welded and stabilized construction with a big cam and a upper bridge who support the upper pressure hydraulic cylinder that enable a rigid and stable forming. The C type allow an easy loading/unloading of the dished ends.
In the base is located the rotation cylinder who support the head and in the upper side is located the pressure cylinder need to work with big thickness. The adjustment of both cylinders is made trough and electromechanically system.
The stroke of the inner cylinder is 700 mm that allow to form dishes of the same height. To forming the small diameters, up to 750 mm, is provide an auxiliary clamping device in both cylinders.
The forming is made between the hydraulic driving of the inner form roller and the outer flanging roller. Hydraulic drive gives optima speed compensation. The big differences of form and flanging rollers, big circumferential speed differences are arising.
The pressure forming roll is continuous swivelling by an hydraulic cylinder, to compensate the sheet deformation during the forming process.
On Haeusler’s principle, the flanging roll moves almost radially around the forming roll, which is an ideal way of movement. The cylindrical part of the dead can be formed without interruption of the forming process.
Since the heads are formed with the opening downwards, mill scale or chips fall out and therefore no damage or plate thinning will occur to the head surface.
Adjustable inclination of the forming roll allows the compensation of the various springbacks when forming different kinds of materials. Also is possible to change the working speed.